Flat Transparent Chemistry Glass Tube Borosilicate 5.0 Heat Resistant Test Tubes ODM

Smooth And Flat Transparent Glass Tube Pure And Bright

raw material

Including main raw materials and auxiliary raw materials. The former refers to the introduction of raw materials such as the oxides that form the network structure of the glass, the intermediate oxides and the oxides outside the network; the latter can accelerate the melting of the glass or make it obtain certain necessary properties.

Glass tube is a type of non-metal tube, which is a kind of glass with sodium oxide (Na2O), boron oxide (B2O3), and silicon dioxide (SiO2) as the basic components. Its good performance has been widely recognized by all walks of life in the world. Compared with ordinary glass, it has no harmful side effects. Its mechanical properties, thermal stability, water resistance, alkali resistance, acid resistance and other properties are greatly improved. It can be widely used in chemical industry and aerospace. , Military, family, hospital and other fields, have good promotion value and social benefits, the appearance of this kind of glass in our country is another new revolution in the basic material industry.

The purpose is to eliminate permanent stress and structural imbalance in glass products. Glass is a poor thermal conductor. After the product is formed, the surface layer and the inner layer will have a temperature difference during the cooling process. When the surface layer is solidified and the inner layer is viscous, the temperature difference exists but the stress relaxation does not exist. This temperature difference occurs when the surface layer is cooled to room temperature. , The inner layer continues to cool down and shrinks, which is hindered by the surface layer to produce tensile stress, and at the same time, the surface layer produces compressive stress, which is permanent. The size and distribution of the permanent stress caused by the thermal process in each part of the product will not be uniform, therefore, it will affect the strength of the glass product, and even break by itself due to stress concentration. Annealing can eliminate harmful tension inside the glass and prevent new stress from being generated. During annealing, heat the glass product or keep it to the annealing temperature after thermoforming, so that the original stress is relaxed and eliminated, and then slowly cooled to below the strain temperature. After the glass has completely entered the state of rigid body, the temperature difference between the inner and outer layers only produces temporary stress . Because certain performance and functional glasses (such as optical glass, thermometer glass) are within the transition temperature range, the huge viscosity makes the structure particles move slowly, so that its performance cannot reach the equilibrium state consistent with the temperature, and it will balance slowly during use. Produce performance changes, so it must be kept at the annealing temperature for a sufficient time.