Borosilicate5.0 Glass Empty Glass Ampoules Smooth Surface

borosilicate5.0 glass Empty Glass Ampoules Smooth Surface

Product

It refers to an injection with a hard drugs, vaccines, serum or the like fusible glass container; it is Latin ampulla transliteration. Commonly used are straight neck and curved neck. Capacity typically 1-25ml. Commonly used in injections, it is also used for packaging oral. However, it did not succeed, because the consumer is difficult to open and prone to accidents. Historical ampoules containing blood samples from the deceased

Common problems and solutions in ampoule filling and sealing edit voice

Sealing injection ampoule and sealing general pull top sealing methods. The finished product produced by the former method has the advantages of smoothness, firmness and tight top. However, in the actual application process, many factors will affect the quality of the filling ampoules, it is necessary to discuss the potting operation. Xiaoshan Qianjiang Pharmaceutical Machinery Plant LSAG-III type filling and sealing machine 1-2ML drawing on filling injection 2ml common problems, causes and solutions or improve follows

I.e., a melt bubble head to win the title ampoule top is formed significantly larger bubbles, easily broken. Cause: Flame drawing too; ampoules drawing tempering time is too long; slightly below the bottom of the folder drawing flame horizontal centerline, although easy to form but can be melt sealed vesicle head. Solution: reduce the flame intensity drawing; drawing ampule after tempering time shortened; drawing clip adjusting the flame to the horizontal center line of the normal distance.
2. That is deflated head recess formed melt win the title ampoule top. After cooling shrinkage ampoule head to form bubbles caused during drawing; not heated by the flame is too small to dry vapor minor ampoule wall, the top of which a low temperature arc vapor ampoule newly formed by cold shrink deflated form: Causes head. Solution: Treat it according to the method of solving the bubble head; strengthen the heating flame to heat the neck of the ampoule to make the tiny water vapor evaporate as soon as possible. 1.5 breakage means not sealed ampoule top. Causes: mechanical reasons; excessive foaming; excessive deflated heads. Solution: Drawing clip adjusting the flame to the horizontal center line of the normal distance; foam head and processed by methods deflated head.