Heat Resistance Empty Glass Ampoules 20ml Sealed Glass Vials

Heat Resistance Ampoules And Vials 1ml-40ml

Product

It refers to an injection with a hard drugs, vaccines, serum or the like fusible glass container; it is Latin ampulla transliteration. Commonly used are straight neck and curved neck. Capacity typically 1-25ml. Commonly used in injections, it is also used for packaging oral. However, it did not succeed, because the consumer is difficult to open and prone to accidents. Historical ampoules containing blood samples from the deceased

Common problems and solutions in ampoule filling and sealing edit voice

Sealing injection ampoule and sealing general pull top sealing methods. The finished product produced by the former method has the advantages of smoothness, firmness and tight top. However, in the actual application process, many factors will affect the quality of the filling ampoules, it is necessary to discuss the potting operation. Xiaoshan Qianjiang Pharmaceutical Machinery Plant LSAG-III type filling and sealing machine 1-2ML drawing on filling injection 2ml common problems, causes and solutions or improve follows

The column is depressed in the top of the melting. Cause: Ampoule is caused by cooling shrinkage after the foam in the drawing process; the heating flame does not smrate into some of the micro-water vapor on the dry mule wall, these low-temperature water motives have a new ampoule top arc to be cold and shrink. head. Workaround: Press the method of resolving the bubble head; add a strong heating flame, so that the ampoule neck is fully heated, so that the micro-water vapor is early. 1.5 Broadle The head is not sealed at the top. Cause: Mechanical reasons; excessive bubbles; excessive gamings. Workaround: Adjust the cable to the flame level center to normal distance; according to the bubble head and the thread method.