Empty Borosilicate 5.0 Amber Glass Ampoule Liquid Medicine Container

Good Sealing Empty Glass Ampoules Clear And Amber

Product

It refers to an injection with a hard drugs, vaccines, serum or the like fusible glass container; it is Latin ampulla transliteration. Commonly used are straight neck and curved neck. Capacity typically 1-25ml. Commonly used in injections, it is also used for packaging oral. However, it did not succeed, because the consumer is difficult to open and prone to accidents. Historical ampoules containing blood samples from the deceased

Common problems and solutions in ampoule filling and sealing edit voice

The tip is the tip of the tip of the ampoule after the preparative. Cause: The flame is too small; the tempering time is too short after the ampoule is too short; the brushed hose is higher than the horizontal center of the flame level; the individual ampoule wall is too thick. Workaround: Strengthen the strength of the brushed flame; adjust the control of the fire head cam, extend the tempering time; adjust the distance between the drawing clip below 1 mm of the flame level center line (mechanical normal position); clear unqualified ampoule.

The column is depressed in the top of the melting. Cause: Ampoule is caused by cooling shrinkage after the foam in the drawing process; the heating flame does not smrate into some of the micro-water vapor on the dry mule wall, these low-temperature water motives have a new ampoule top arc to be cold and shrink. head. Workaround: Press the method of resolving the bubble head; add a strong heating flame, so that the ampoule neck is fully heated, so that the micro-water vapor is early. 1.5 Broadle The head is not sealed at the top. Cause: Mechanical reasons; excessive bubbles; excessive gamings. Workaround: Adjust the cable to the flame level center to normal distance; according to the bubble head and the thread method.