Smooth 1ml-40ml Medicine Glass Ampoule Clear Amber

Top Smooth Ampoules And Vials Easy Open End

Product

It refers to an injection with a hard drugs, vaccines, serum or the like fusible glass container; it is Latin ampulla transliteration. Commonly used are straight neck and curved neck. Capacity typically 1-25ml. Commonly used in injections, it is also used for packaging oral. However, it did not succeed, because the consumer is difficult to open and prone to accidents. Historical ampoules containing blood samples from the deceased

Common problems and solutions in ampoule filling and sealing edit voice

The bubble head is formed in the top of the ampoule on the top of the ampoule, which is easy to break. For reasons: the brushed flame is too strong; the tempered time is too long after the ampoule is filament; the bottom of the drawing clip is slightly lower than the flame level centerline, although it can be melted but easy to form a small bubble head. Workaround: Denead the strength of the brushed flame; shorten the tempering time of the retracted ampoule; regulate the width and the flame level center to normal distance.

The column is depressed in the top of the melting. Cause: Ampoule is caused by cooling shrinkage after the foam in the drawing process; the heating flame does not smrate into some of the micro-water vapor on the dry mule wall, these low-temperature water motives have a new ampoule top arc to be cold and shrink. head. Workaround: Press the method of resolving the bubble head; add a strong heating flame, so that the ampoule neck is fully heated, so that the micro-water vapor is early. 1.5 Broadle The head is not sealed at the top. Cause: Mechanical reasons; excessive bubbles; excessive gamings. Workaround: Adjust the cable to the flame level center to normal distance; according to the bubble head and the thread method.