Corrosion Resistance borosilicate Small Glass Vials 2ml 3ml 5ml

Good Corrosion Resistance Glass Tube Vials 2ml-50ml

Procuct

The purpose of eliminating permanent stresses in the glass article and structural imbalances. Glass is a poor conductor of heat. After molding, the inner surface layer and the temperature difference in the cooling process there. When the inner surface layer solidification thick, but there is the temperature difference stress relaxation. When the surface layer cooled to room temperature, this temperature difference will appear. Inner continued cooling shrinkage, tensile stress hampered by the surface, while the surface compressive stress, is permanent. Size and distribution of permanent stresses caused by thermal processing of the product portions are not uniform, and therefore, it will affect the strength of the glass product, and even break by itself due to stress concentration. Annealing can eliminate harmful tension inside the glass and prevent new stress from being generated. During annealing, heat the glass product or keep it to the annealing temperature after thermoforming, so that the original stress is relaxed and eliminated, and then slowly cooled to below the strain temperature. After the glass has completely entered the state of rigid body, the temperature difference between the inner and outer layers only produces temporary stress . Because certain performance and functional glasses (such as optical glass, thermometer glass) are within the transition temperature range, the huge viscosity makes the structure particles move slowly, so that its performance cannot reach the equilibrium state consistent with the temperature, and it will balance slowly during use. Produce performance changes, therefore, it must be kept at the annealing temperature for sufficient time

Features

◆ GMP production environment

◆ Online statistical control

◆ meet ISO size and appearance AQL level

◆ detecting camera parameters and critical size defects in appearance key 77

◆ Each product can be traced to the time of delivery (DD-MM-YY), shift, machine and operator.

It belongs to PYREX glass in borosilicate glass. Acid and alkali resistance, water resistance, superior corrosion resistance, good thermal stability, chemical stability and electrical properties, so it has the characteristics of chemical resistance, thermal shock resistance, good mechanical properties, and high temperature resistance. Borosilicate glass (also known as hard glass) has a linear thermal expansion coefficient of (3.3±0.1)×10-6/K, so some people call it "borosilicate glass 3.3". It is a special glass material with low expansion rate, high temperature resistance, high strength, high hardness, high light transmittance and high chemical stability. Because of its excellent performance, it is widely used in solar energy, chemical industry, pharmaceutical packaging, and electric light sources. , Craft jewelry and other industries.

principle

The purpose is to eliminate permanent stress and structural imbalance in glass products. Glass is a poor thermal conductor. After the product is formed, the surface layer and the inner layer will have a temperature difference during the cooling process. When the surface layer is solidified and the inner layer is viscous, the temperature difference exists but the stress relaxation does not exist. This temperature difference occurs when the surface layer is cooled to room temperature. , The inner layer continues to cool down and shrinks, which is hindered by the surface layer to produce tensile stress, and at the same time, the surface layer produces compressive stress, which is permanent. The size and distribution of the permanent stress caused by the thermal process in each part of the product will not be uniform, therefore, it will affect the strength of the glass product, and even break by itself due to stress concentration. Annealing can eliminate harmful tension inside the glass and prevent new stress from being generated.

Corporate Philosophy

- Basic conception is contribution to the development of pharmaceutical industry to guarantee the safety of people taking medicine

- Innovation is an engine of corporate

- Everything must be in on the practice base

- Always focus on products qualit

- Always highly take care of high efficiency

- Always unite all staff and workers together for same goal