Odm Glass Ampule 1ml-40ml Low Borosilicate 5.0 Glass

1ml-40ml Low Borosilicate Steroid Vitamin Glass Ampoule Borosilicate5.0 Glass

Product

Modern ampoules are fired in glass tubes and are widely used to hold injectable preparations and high-purity chemicals that must be isolated from air. The nipple of the ampoule is sealed with an open flame to keep out the air, the neck of the ampoule is marked with a mark, and the neck of the ampoule will break when pressure is applied, so that the liquid can be extracted

Ampoules are fired in glass tubes and are widely used for injections and high-purity chemicals that must be isolated from the air. The ampoule's nipple cuts off the air with an open flame. The bottle neck is marked with color circles, color dots, etc., pressure is applied to break the bottle neck, and the potion is advanced.
Use of Ampoules: Ampoules are small glass containers used to hold liquid medicines. The volume is generally 1-25ml. Commonly used for liquid injection. Before opening the bottle, use a grinding wheel to scrape off the neck, sterilize the neck, move the nipple up so the liquid flows into the bottle, and then break the neck. For easy-to-fold ampoules, mark the factory precut section on the nipple, then snap the nipple straight in that direction.

Quality requirements

1. The ampoule glass should be colorless and transparent;

2. Small expansion coefficient and good heat resistance;

3. It must have sufficient physical strength to withstand the high pressure difference generated during autoclaving;

4. High chemical stability, does not change the PH value of the solution;

5. Low melting point, easy to melt and seal;

6. No bubbles, pits and grit